Power Requirements : 110/220V. 60/50Hz. AC (%±10) 24V. DC at standby ~2W. max. ~65W.
Dimensions : Cylindrical body 1030mm x Ø230mm x Wing width (450 - 900mm).
Body Features : 1mm thick, single piece, 304-Grade satin finished stainless steel cylindrical body.
Wing Features : Wing is made of 10 mm. thick tempered glass (Opt. Lexan or Plexiglas). 550mm or 900mm. wing lengths are available as standard choices.
Top Lid Features : Standard 20mm thick natural granite (Star Galaxy Black) stone top lid for a decorative and aesthetical appearance.
Indicator Feature : Built-in circular RGB LED status indicators are located under granite top lid. Illumination is blue at standby; green during authorised passage and flashing red for unauthorised attempts or emergency alert mode.
Operating Temperature, Humidity, IP Rating, MCBF : -20°C - +68°C (Opt. -50°C with heater unit) / RH 95% non-condensing / IP 44 Indoor Model (Opt.For pipe wing versions IP 56 Option is available)/ 1M Cycles.
Control System : All inputs are opto-coupler protected .Controlled by dry contact or grounding input. Compatible with all access control systems that provide dry contact or grounding outputs. Optional RS232/RS485/TCP IP control module is available.
System Features& Operation : Bi-directional DC motor driven mechanism with torque and speed adjustments. The system opens the wing in either direction upon receiving contact to allow passage.
Emergency Mode : In case of emergency input, the wing opens in either direction (pre-set direction by internal dip-switch) and the system stays in open position until the emergency input is removed. Wing can be pushed open manually in either direction in case of a power failure.